Jayco Bag Awning Rafter Mounting Brackets (4 Pack)

This mounting bracket is used with Jayco branded Bagged Awning Rafters to secure the awning roof rafter with a bent spigot to the Camper Trailer. 

Details:

  • 4x Brackets with Backing Plates Included
  • Designed for Jayco branded bag awnings
  • Zinc Plated 

Notes:

  • Please note screws are not included.
  • It's recommended to use small stainless steel self-tapping screws approximately 10mm in length. Pre-drilling a small pilot hole will assist in attaching each screw.
  • These brackets are designed for the Jayco branded bag awnings only. They may not be suitable for other brands of bags awnings.

See our full range of Jayco products.

SKU C2725AQ4
Model # C2725AQ4
Barcode # Does not apply
Brand Jayco
Shipping Weight 0.1200kg
Shipping Width 0.120m
Shipping Height 0.040m
Shipping Length 0.160m
Shipping Cubic 0.000768000m3
Type New
Location Code 5B9

Help other users shop smarter by writing reviews for products you have purchased.

Write a review

All items in our store are from reputable Australian suppliers and are covered by a 12-month  warranty for faults and defects.

Products must be used correctly and for the function they were designed for. Damage by customer misuse is not warrantable. 

For full warranty information, visit our warranty page - Click here. 

If you would like to submit a warranty claim, please submit a support ticket on our Customer Support Portal.

Click here to visit the portal

Due to the high incidence of online fraud, you will be required to provide proof of any warranty claims and may be required to return the item for assessment. 

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 

 

Details:

  • 4x Brackets with Backing Plates Included
  • Designed for Jayco branded bag awnings
  • Zinc Plated 

Notes:

  • Please note screws are not included.
  • It's recommended to use small stainless steel self-tapping screws approximately 10mm in length. Pre-drilling a small pilot hole will assist in attaching each screw.
  • These brackets are designed for the Jayco branded bag awnings only. They may not be suitable for other brands of bags awnings.

We Also Recommend

Jayco Bagged Awning Rafter Pole
(2)
Sold Out

You May Also Like

Jayco Bed End Flys (Queen & Double) - Grey Bags
(18)
Quick Fill - Caravan Water Tank Filler
(23)
Bed End Flys with Waterproof Sides & Windows
(5)

More From This Category

Awning Support Cradle (White)
(6)
$14.95
RRP $19.80