Trail-A-Mate Mark II Hydraulic Jack Only

Trail-A-Mate MKII is a hydraulic jack designed to lift larger and heavier caravans than the original Trailamate Jockey Wheel/Jack. The outside diameter of the jack is 60mm and while a 60mm jacking clamp is included, the 60mm A-Frame clamp is an optional extra.

The key features of the Mark II are as follows:

  • Capability - WLL 1,500kg / ATM 3,500kg
  • Ease of Use - Being hydraulic it takes very little effort to operate
  • Safety - Fully complies with the mandatory safety standards (2693:2007)
  • Comes with a detachable flat base (Not suitable for use with a wheel).
  • Includes a 60mm Jacking Clamp
  • Includes Engagement Fitting

It has many applications and uses as you will see below such as Caravanning, Horse Floats, Trailers, Food Vans, Motor Homes (the list goes on). It is even used by the Australia Defence Force - four Trail A Mates are used on each corner of a vehicle that carries a telescope so it can be safely levelled on uneven ground. It is an extremely versatile product.

Please note this will not fit a standard 50mm clamp. A separate 60mm clamp will need to be purchased for use on the drawbar.

See our full range of Trail A Mate products.

SKU 40981
Model # 40981
Barcode # Does not apply
Brand Trail-a-Mate
Colour Silver
Shipping Weight 18.0000kg
Shipping Width 0.160m
Shipping Height 0.150m
Shipping Length 0.740m
Shipping Cubic 0.017760000m3
Assembled Length 0.745m
Assembled Height 0.145m
Assembled Width 0.170m
Type New
Location Code FRONT WAREHOUSE 18

Help other users shop smarter by writing reviews for products you have purchased.

Write a review

All items in our store are from reputable Australian suppliers and are covered by a 12-month  warranty for faults and defects.

Products must be used correctly and for the function they were designed for. Damage by customer misuse is not warrantable. 

For full warranty information, visit our warranty page - Click here. 

If you would like to submit a warranty claim, please submit a support ticket on our Customer Support Portal.

Click here to visit the portal

Due to the high incidence of online fraud, you will be required to provide proof of any warranty claims and may be required to return the item for assessment. 

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 

 

The key features of the Mark II are as follows:

  • Capability - WLL 1,500kg / ATM 3,500kg
  • Ease of Use - Being hydraulic it takes very little effort to operate
  • Safety - Fully complies with the mandatory safety standards (2693:2007)
  • Comes with a detachable flat base (Not suitable for use with a wheel).
  • Includes a 60mm Jacking Clamp
  • Includes Engagement Fitting

40981

We Also Recommend

Trail-A-Mate Hydraulic Jockey Wheel and Jack
(9)
Fridge Vent Screen with Sail Track
(8)
KOVIX Alarmed Trailer Lock
(6)

You May Also Like

Caravan Awning Rope Clips
(33)
Campsmart XD 4.9m Caravan Privacy Screen
(1)
Quick Fill - Caravan Water Tank Filler
(22)
Campsmart XD Caravan End Wall Privacy Screen
(19)

Others Also Bought

Supex Double Pull Out Folding Step
(6)
Single Pull Out Caravan or Camper trailer step - Steel
(5)
Trail-A-Mate Hydraulic Jockey Wheel and Jack
(9)
Jack Outdoor Antenna
(11)

More From This Category

Ark XO Quick Hitch Off Road Coupling 3.5T
(2)
Trailer Valet 5X Caravan & RV Mover
(2)
Sold Out
$499.00
RRP $577.50